Ja, ich suche eine Lösung
hello,
reserved for the deduplication disk (PureDisk) is saturated, how I frees space in the disk in question (is there a way to liberate a space)??
↧
Puredisk
↧
multiple "Task ended on server PureDisk:"
Ja, ich suche eine Lösung
Hi
I'm getting multiple error messages in the Problems / Disk Log in Netbackup 7.5.0.5 administration console:
"Error 0 33280 Task ended on server PureDisk:SERVERNAME on host SERVERNAME. nbemm"
Jobid=0 Type=33280 Process=nbemm
There's usually multiple (50+) entries in a row with "Task ended on server". All backupjobs are running fine, the disk pool (MSDP) have status "Up", but what does the errors mean? The only related documentation I can find is this, and it doesn't really explain anything:
http://www.symantec.com/business/support/index?pag...
The server is running on Win2008R2, NB version 7.5.0.5, using MSDP.
↧
↧
Advanced Disk Space v De-Dupe Disk Space - 5230 Appliance
Ja, ich suche eine Lösung
Hi,
We have a new 5230 appliance where the internal disk has been set up (by default) in the following way:
Catalog 20% - around 930GB
Advanced Disk 16%
De-duplication Pool 64%
We intend to backup to site A, then use AIR to replicate to site B (another 5230 appliance) where the backup will be eventually vaulted off to tape. However, some data will stay at site A until its expiry date (1 year). We have various retention times and clients.
1. Are there any calculations for the amount of catalog ratio to backups. Is 20% catalog to high, should I resize this. I know its an open question somewhat but is there any rule of thumb?
2. As you can see, I have a mixture of Advanced Disk and De-dupe disk. How do we balance between de-dupe space and advanced disk? What is the difference? We want to get the benefit of de-dupe for every backup so why wouldnt we configure the whole capacity to be De-dupe disk and have no advanced? Would I use Advanced Disk for some backups and De-dupe for others?
So we would end up with:
Catalog 20% - around 930GB
De-duplication Pool 80%
Could someone help explain my options?
Kind Regards
↧
Bpexpdate query
Ja, ich suche eine Lösung
Hi all,
i am running the bpexpdate command using - bpexpdate -backupid svr-server_1391110193 -d 02/16/2014 17:30:00 -copy 1 -force
i get no error when running this command however when i use the command - bpimagelist -U -backupid svr-server_1391110193 i get the following output:-
Backed Up Expires Files KB C Sched Type On Hold Index Status Policy
---------------- ---------- -------- -------- - ------------ ------- ------------ ------------
01/30/2014 19:29 02/06/2014 71 556560316 N User Backup 0 0 HQ-SAP-Live
this output shows that the image will still expire on the original expiry date and not the one i changed it to by running bpexpdate command changing the expiry date to the 16th
this image is part of a SLP and was wondering if it is not possible to change the expiry date of an image that is part of a SLP?
Can anyone help with thi?
Many thanks
Tracy
↧
Need Puredisk Health checkup commands
Ja, ich suche eine Lösung
Hi Experts,
Could some one help me with commands for daily healthcheckup on puredisk pools.
Thanks in advance.,
↧
↧
Systemstate restores failed with media error
Ja, ich suche eine Lösung
Hi Friends,
I have tired the Systemstate restore from Basic disk & MSDP for Windows 2008 & 2003. Both are failed with media read error 85.
Ran the image verification, it got successful. But not able to restore successfully. Master server NBU 7.1.0.2.
Any idea to fix this?
Regards,
N
↧
Symantec Puredisk v:6.1.5.2 | Scheduled backups are not running
Ja, ich suche eine Lösung
The scheduled backups are not running for the past 4 days. The cron is running and alll other puredisk is also running.We are able to see the backups that took place before 4 days. i want to know the reason for this issue and the solution for this issue.
Product: Symantec Puredisk
Version:6.1.5.2
OS: Suse Linux
↧
NetBackup SQL Agent
Ja, ich suche eine Lösung
Hi
Can anyone tell me if the NetBackup SQL agent supports database partitioning?
Many thanks
Tracy
↧
Netbackup Appliances 5230 with PureDisk: How many streams?
Ja, ich suche eine Lösung
Hi all,
We recently migrated to Netbackup Appliances running Netbackup 7.6.0.1 (Appliance version 2.6.0.1 )
We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB PureDisk volume.
We are quite new to PureDisk that is running on these systems, but at this moment they are limited to 80 streams maximum in the diskpool object (Which seems pretty low to me)
At the moment we are running out of resources due to this maximum that has been set.
What is the maximum streamcount a 5230 Appliance PureDisk can safely handle?
Note that we are using AIR to replicate all our images, but replication is being done during the day, not during backup times...
Any advice is greatly appreciated!
Thanks!
↧
↧
Policy Tipe
Ja, ich suche eine Lösung
Hi,
i've this problem....on my system i've configured 2 tape library (1 have lto2 and the other run lto4) and now i would like have a policy first run on disk pool then pass the backup on tape.
Can I do this?
How can i create that policies?
Regards
↧
Want to know the complete algorithm of upgrading Puredisk 6.5.1.2 to the latest version of 6.6
Ja, ich suche eine Lösung
Hi All,
Product in use: Veritas Netbackup Puredisk 6.5.1.2 v
Installed on Suse linux:
# uname -a
Linux mpsc-pdisk01 2.6.16.60-0.31-smp #1 SMP Tue Oct 7 16:16:29 UTC 2008 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/SuSE-release
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 1
# cat /proc/version
Linux version 2.6.16.60-0.31-smp (gcc version 4.1.2 20070115 (SUSE Linux)) #1 SMP Tue Oct 7 16:16:29 UTC 2008
- What are the precautions should I be taking?
- Can I directly upgrade from 6.5.1.2 to the latest version of 6.6?
- What is the latest version of 6.6?
- We are running SUSE Linux Enterprise Server 10 SP1 and PD 6.6.5 requires SP2. Since these PD servers were originally Symantec builds, does Symantec provide the SP 2 media?
- How long does the PureDisk server upgrade take?
- Do all tasks/services need to be stopped before/during the upgrade?
- Is there a specific sequence that we need to follow (e.g. PD source server, PD clients, PD target server)?
- How long does the client upgrade take and how resource intensive is it on the client (should we be concerned about impacting the clients during the middle of their business day)?
- Can all of the client upgrades be pushed out at the same time or is it recommended to only do several (count?) at a time?
- If we upgrade the servers during the day (when no backups are running), can the agents (old version) still back up to the upgraded servers (in case we can't upgrade all of the clients in one day)?
- What will be the impact of PD server upgrade on the agents/clients which are connected to it?
- Should I have to worry about compatibility issue? Are there any compatibility criteria?
Please help.
Thanks & Regards,
Rizwan
↧
Exchange 2010 DAG Backup slow
Ja, ich suche eine Lösung
Hi All,
This has been discussed on this forum before and i have read the posts, i would just like to ask the forum for their opinion on what is happening in our environment.
I am currently testing backing up Exchange 2010 DAG backups and it takes 25 minutes to backup 5 GB - there is a lag between snapshot creation and backup data being written.
on checking Veritas\NetBackup\online_util\fi_cntl - for 12 mailbox databases totaling 5GB, over 600 metadata files are being created - as i understand it, these metadatafiles are created to correspond to every log file that is in Exchange, and the snapshot is not created until these files have been created. This is the point that seems to take the time. Is there a way of speeding up this process?
Our environment:
windows server 2008 R2 master/media/client
NetBAckup 7.5.0.6 master/media/client
MSDP
we are backing up passive copies from a preferred server list containing 2 x servers - non GRT
we are using multiplexing = 8 and so on the policy have set the 'limit jobs per policy' to 8
NUMBER_DATA_BUFFERS - 32
SIZE_DATA_BUFFERS - 262144
i have disabled the database consistency check in the Exchange attributes for each client
i found this tech note [http://www.symantec.com/business/support/index?page=content&id=TECH208180] regarding Exchange 2010 DAG Backup slow on 7.5.0.5 client, however according to the technote this was resolved in 7.5.0.6. [which is the version we are running] I plan to downgrade the client to 7.1 and test to see if the time to back up improves and will post the results
I find it hard to believe that 25 mins to back up 5 GB is normal behaviour, and our estimated amount of total data for Exchange is expected to reach around 15 TB!
Any advice would be appreciated
Regards
Tracy
↧
How to restore MSDP master/media server after disaster
Ja, ich suche eine Lösung
Hello,
This is my first post.
We have two NetBackup 7.0.1 servers. Both W2008R2 ent. Both VMs.
We use MSDP feature. Both servers have 10Tb drives to hold images.
Catalog backup jobs are configured. Key file is copied over the network to another DC.
Catalog restore process is clear for me.
The question is:
Are there any additional steps to restore CRDB? 10Tb drives?
Could you please provide best practice/manual?
Thank you in advance.
↧
↧
Error 25 or Error 6 on rman Backup
Ja, ich suche eine Lösung
Hi,
i've three enviroment have rman backup on oracle DB, one of this have that error a lot?
What problem? network?
↧
NBU Puredisk
Ja, ich suche eine Lösung
How to configure puredisk pls provide steps on windows servers
↧
PureDisk Login Error
Ja, ich suche eine Lösung
Hi,
We are not able to login to PureDisk. We get the following error message at the login screen
|
This was after renewing an expired account but the account doesn't say it is expired anymore as you can see here
I thought this may have been a certificate issue but i imported the broker certificate into cacerts but still didn't work.
Does anyone know how to solve this issue?
Thanks
↧
Images Not expiring off Disk Netbackup 7.6
Ja, ich suche eine Lösung
Hello
I have noticed that one of our PureDiskVolume deduplication disks has filled up (above 95% water mark). I have expired some old images that are no longer required, I have done this but the space has not been cleaned up. I understand there is another command that needs to be run to reclaim the space but am unsure what command to safely use as I do not want to remove all my other backups on the disk. I only need the images I have expired space re claimed
Hope someone can help
Thanks In advance!
↧
↧
Need Puredisk Health checkup commands
Ja, ich suche eine Lösung
Hi Experts,
Could some one help me with commands for daily healthcheckup on puredisk pools.
Thanks in advance.,
↧
Symantec Puredisk v:6.1.5.2 | Scheduled backups are not running
Ja, ich suche eine Lösung
The scheduled backups are not running for the past 4 days. The cron is running and alll other puredisk is also running.We are able to see the backups that took place before 4 days. i want to know the reason for this issue and the solution for this issue.
Product: Symantec Puredisk
Version:6.1.5.2
OS: Suse Linux
↧
Backup for File server
Ja, ich suche eine Lösung
We have one Windows 2008 R2 - file server ( this is used for providing shared storage folder to users ). Required backup for this server.
Purchased Netbackup version 7.6.0.1 and configured Widnows master server.
Available 2 TB storage EMC - NAS. This storage connected Directly to Master.
1Gig - Network.
1. My catalog also stored same location
2. Need to utilze 2 TB Storage. So my plan to configure puredisk. ( Not required replication ).
Please provide how to configure Pure disk storage units and which is best to utilize Storage method.
Thanks
Tekkali
↧